ƯU ĐÃI KHI MUA HÀNG

🔖 Hàng Nhập Khẩu Chính Hãng NEXO Pháp

💵 Giảm thêm 3% cho khách hàng thân thiết

🎖 Hàng Nhập Khẩu Bởi Công Ty PRO-SOUND

🎯 Bảo Hành Chính Hãng 24 THÁNG

🚀 Trải Nghiệm Miễn Phí Tại Showroom

🚗 Giao hàng thu tiền tận nơi trên TOÀN QUỐC

Amplifier Nexo DTD-AMP4X0.7

Giá chưa VAT

SKU: DTDAMP4X0.7

Giá bán: 0₫

Tình trạng: Còn hàng
ĐƠN VỊ :

Số lượng

Mua trả góp Qua thẻ tín dụng Visa, Mastercard

Liên hệ

MR.Nam : 0942 979 696

Kinh Doanh : 0982 865 225

Bán Buôn : 0988 088 730

DTDAMP4X0.7

The DTDAMP range is composed of two models of four channel amplifiers housed in a 1U rack and weighting only 7.5 Kg. The DTD Controller offers a very efficicent solution for processing most of the Nexo Speakers, from the ID series to our world famous PS15. When used with a DTDAMP you are sure to get all the necessary power for your NEXO speakers, while this combo offers both a coherent look and ease of use. A pair of DTD + DTDAMP will weigh together less than 10 Kg, while being able to process and power system composed, for example, of 2 x NEXO Speakers + 2 x NEXO subs. This performance is due to the use of high-density and highly integrated components together with high-efficiency design (smaller heatsinks) for power supply/power amplifier parts. The DTDAMP offers all the sensor and protection that are mandatory for a professional touring amplifier, such as mains over/under voltage, Over-voltage or DC output on each channel, short circuit etc. The variable speed cooling system will assure a quiet and cool amplifier while the front to back cooling system ensure compatibility inside racks where both DTDAMP and our high-end NXAMP are used together in large installations. Once your NEXO Speakers are selected in your DTD Controller, you can use your DTD +DTDAMP system in most situations without any further adjustments to the settings. When used with the NEXO DTD controller the DTDAMP is the perfect solution for “Dry” hire or where the user has a limited knowledge but still allowing the best possible result from the Nexo speaker system.

KEY FEATURES

  • Two models of high-power, lightweight four channel amplifiers
  • Perfect match for the NEXO speakers supported by the DTD Controller
  • High-efficiency Switch Mode power supply and Amplifier channel design
  • Channels can be independently bridged two by two
  • Four Inputs on XLR connectors and four Outputs on SP-4 connectors
  • Extensive protection (Mains over/ undervoltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system)

SPECIFICATIONS

Number of channels4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load)4 x 85 Volts
Max. output power (4 x 8 Ohms)4 x 360 Watts
Max. output power (4 x 4 Ohms)4 x 700 Watts
Max. output power (2 bridge x 8 Ohms)2 x 1400 watts
Frequency response+/- 0.5 dB from 20 Hz to 20 kHz
Input impedance10 kOhms
Input sensitivity+5 dBU
Nominal Gain32 dB
Dynamic Range (A-weighted)> 110 dB
THD+NTypical 0.01%

SPECIFICATIONS

Number of channels4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load)4 x 85 Volts
Max. output power (4 x 8 Ohms)4 x 360 Watts
Max. output power (4 x 4 Ohms)4 x 700 Watts
Max. output power (2 bridge x 8 Ohms)2 x 1400 watts
Frequency response+/- 0.5 dB from 20 Hz to 20 kHz
Input impedance10 kOhms
Input sensitivity+5 dBU
Nominal Gain32 dB
Dynamic Range (A-weighted)> 110 dB
THD+NTypical 0.01%

FEATURES

Analog audio inputs4 x balanced analog inputs on XLR
Power outputs4 x SP4 outputs
Link switchTo use same XLR input for 2 x adjacent channels
Mains socketsIEC C14 Inlet with secure lock
Switch and knobsMains On/Off switch and volume control knob per channel
View metersx LEDs (signal / -18 dB / -6 dB / Peak) per channel
Amplifier statusAmp Ready and Temperature indicator per channels pairs
Mains voltageFactory set for 120 volts of 230 volts mains operation
Power consumption (Idle)65 Watts
Power consumption 1/8 max. / 4 Ohms580 Watts
Power consumption 1/4 max. / 4 Ohms1100 Watts
Dimensions (W x H x D)480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
Weight7.5 kg
Operating temperature range0°C - 45 °C
CE conformity2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
Electrical safety certificationCSA, CB, EN60065
EMC certificationEN55103-1 / EN55103-2 / FCC

Mô tả ngắn

Thông tin sản phẩm

  • Mã sản phẩm: DTDAMP4X0.7
  • Thương hiệu: NEXO
  • Loại sản phẩm: AMP-Series
  • Tình trạng: Còn hàng

Ưu đãi từ chúng tôi

SETUP LẮP ĐẶT MIỄN PHÍ

Đầy Đủ VAT Co,Cq Sản Phẩm

  • Giao hàng tận nơi, miễn phí.
  • Đổi mới trong vòng 15 ngày.
  • Thanh toán khi nhận hàng.

Có thể bạn quan tâm